Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Home | News & Articles | New addition to the family of call stations! CCS-IP2-CR Crane call station

New addition to the family of call stations! CCS-IP2-CR Crane call station

| 16.12.2020

Armtel has developed a new CCS-IP2-CR crane call station.

The device designed for use in crane cabins, but can also be used in control rooms as a small communication console.

CCS-IP2-CR contains four communication buttons to which you can program various functions – direct call, group communication, control of external actuating devices and others. Next to the buttons there are places for installing marking plates to indicate the programmed communication function, it is also possible to turn on the backlighting of the plates for easier reading in the dark.

The CCS-IP2-CR “gooseneck” microphone allows you to comfortably communicate even at a distance from the device. Using a push-to-talk device or a foot switch to control a call makes it possible to give commands to workers on the ground without being distracted from the crane control.

CCS-IP2-CR works in IP networks and through a Wi-Fi access point (not in supply package) it can be connected to the enterprise network to organize PA/GA and intercom in IPN and ArmtelICS systems.

The embedded CCS-IP2-CR software allows you to organize a completely decentralized system. To build a communication system, only two devices are enough.

The device is produced in two versions – wall-mounted and flush-mounted. It also supports redundant Ethernet interfaces with PoE power supply.

You can learn more about the new CCS-IP2-CR Crane in the product catalog by clicking here.