Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Home | Products | CCS-IP2-CR Crane Call Station

CCS-IP2-CR Crane Call Station

Crane Call Station CCS-IP2-CR is a subscriber crane equipment designed for use in decentralized and centralized intercom and PA/GA systems IPN and ArmtelICS at industrial and transportation enterprises. The device provides communication between the crane operator and other subscribers, incl. dispatcher and other workers.

Parameter
Value
Rated power supply voltage*, V
48
Permissible supply voltage range *, V
from 37 to 57
Conformity with the PoE class
IEEE 802.3af Class 0
Reverse polarity protection
available
Maximum current consumption*, A
0,28
Maximum power consumption*, W
12
Maximum switching power the integrated relay (in CCS-IP-CR supply voltage range), W
60*
Bandwidth of LF signal (-3 dB)** of the transmit and receive assembly, Hz
from 300 to 6800
Sound pressure level at maximum volume, SPL at a distance of 1,0/0,5/0,3 m, at least, dB
92/95/97
Maximum electric power of the integrated loudspeaker amplifier, no less than, W
2
Number of programmed direct connections/functions
4
Total duration of voice messages stored in the device memory, no less than, min
1500
Communication interfaces
IEEE 802.3u (100BaseT), IEEE 802.3i (10BaseT)
ADSL, ADSL2, ADSL2+ ITU-T G.992.1...992.5
Communication protocols
Armtel-IP, SIP, SNMP
Audio data format (coder/decoder):
- over SIP protocol

G.711A (A-Law)
G.711U (µ-Law)
G.722.1
- over Armtel-IP protocol
Armtel-IP
Electric protection class as per ГОСТ IEC 60065, IEC 61140:2009
III
Climatic category as per GOST 15150-69:
Wall-mount
Flush-mount


NF2
NF4.1

Ingress protection as per GOST 14254-2015 (IEC 60529:2013):
Wall-mount
Flush-mount

IP65
IP1X***

Ambient operating temperature range, °С
from -40 to +50
Max. relative air humidity,%:
Wall-mount
Flush-mount

100 (at temperature of +25 °C with moisture condensation)
80 (at temperature of +25 °C without moisture condensation)

Maximum dimensions, mm:
Wall-mount
Flush-mount
Gooseneck microphone

245×146×58
222×146×58
Ø27×375

Maximum weight , kg:
Wall-mount
Flush-mount


1,7
1,6

* Voltage − DC.
** Only when using SIP codec G.722.1 or Armtel-IP
*** Without taking into account the degree of protection provided at the site of operation after installation of the device.

CCS-IP2-CR Crane Call Station is designed for use in crane cabins (or similar facilities in terms of operating conditions) installed on industrial cranes operated in open space or industrial facilities.

CCS-IP2-CR contains embedded software and configuration data stored in RОM, which allows it to communicate with other digital communication system users directly, handle priority connections and manage communication and indication modes. An IP-network built using standard network equipment is used to facilitate communication.

CCS-IP2-CR can be used in the metals, chemical, mining, oil and gas, metal processing and wood processing industries, in facilities of the Transportation Ministry, Emergencies Ministry, Interior Ministry and Defense Ministry.

  • Two-way loud-speaking simplex communication via Armtel-IP and SIP protocols;
  • Half-duplex (manual control) communication via SIP protocol;
  • Indication of busy call, incoming and outgoing calls, unanswered call notification on direct buttons;
  • Free programming of the direct buttons (up to 4 pcs.);
  • Voice message recording via the programmed key with the local function of fragment recording and playback of voice messages on end-user devices;
  • Control of the ACM-IP2 and ACM-IP2.1 analogue subsystem module with “Relay” function;
  • Connection to the IP network via Ethernet 100BaseT or ADSL;
  • Network connection redundancy in versions with two Ethernet interfaces;
  • Enabling organization of a group simplex call;
  • Volume adjustment for the integrated loudspeaker;
  • Call implementation on a priority basis (up to 255 priority levels);
  • Setting up unilateral control and “End” function modes;
  • Control (commutation) of external actuating devices using an integrated electro-mechanical relay (lamp-type signaling device);
  • Ability to connect a microphone with push-to-talk, a push-to-talk device or a foot switch.
Document
Version
Language
Date
Action

order
CCS-IP2-CR Crane Call Station

Fill out the form and we will contact you

By clicking the “Send” button You consent to the processing of your personal data. We guarantee the use of your data only for the processing of your application. The full version of the “Agreement on the processing of personal data” can be found here.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.