Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Home | Products | PA/GA systems | DIS-IP2 Desktop call station

DIS-IP2 Desktop call station

Desktop call station DIS-IP2 is a subscriber unit of Armtelics system, and designated to be used at industrial and transportation sites.

Each DIS-IP2 contains built-in software and configuration data, which allows it to communicate with other subscribers of the network directly, through wireless Wi-Fi data transmission channel or using ADSL, as well as to manage communication and indication modes.

Parameter
Value
Power supply by line PoE (IEEE 802.3af/ IEEE 802.3at)
48 V
External DC power supply
12 V or 48 V
Maximum current consumption by line PoE
0,3 А
Maximum current consumption with 48 V power supply
0,3 А
Maximum current consumption with 12 V power supply
1,2 А
Bandwidth of the low-frequency signal (-3 dB level)
from 300 to 14000 Hz
Maximum electric power of built-in two-channel amplifier, for each channel, min
1 W
Network interfaces
2x100BaseT Ethernet, ADSL (IEEE802.3),WI-FI 2.4 (IEEE 802.11a/b/g/n)
Network protocols
Armtel-IP, SIP, SNMP
Air humidity
from -5˚C to +55˚C
Protection level
Up to 80 % at +25˚С
Protection level
IP40
Electrical safety class
III
Dimensions (with maximum vertically raised microphone), max
285×200×416 mm
Weight (depending on versions), max
from 0,97 to 1,18 kg

DIS-IP2 master call station is used together with dedicated Armtel SIP server (ArmtelICS central exchange) or it can be used in serverless Armtel digital Intercom and PAGA communication systems.
DIS-IP2 is a desktop call station and has versions for eight, sixteen, twenty four and thirty two keys. DIS-IP2 keys are equipped with LED indication, have increased mechanical strength and are resistant to wear, have a transparent cap for placing the inscriptions. Any key can be assigned for a communication function.
For communication between the devices via Wi-Fi wireless data transmission channel, DIS-IP2 has a built-in Wi-Fi module and antenna.
To ensure data transfer via the DSL channel, the DIS-IP2 has a modem ADSL Module. The ADSL module can automatically identify and automatically switch between the ADSL, ADSL2 and ADSL + standards, with the maximum outgoing traffic speed of 1 Mbit / s, and the fastest incoming rate of 24 Mbit / s (ADSL2 / 2 +).
DIS-IP2 master call station uses a highly sensitive microphone on a flexible “goose-neck” stand. The microphone has a red LED ring that indicates the type of incoming or outgoing communication with a constant glow or blinking. The microphone is equipped with a wind protection, which makes the sound cleaner (avoid the appearance of unwanted whistles and other similar distortions).
DIS-IP2 master call station is designed for installation in operator control rooms, offices and premises.

  • 8, 16, 24 and 32 keys;
  • Connection of up to 4 additional DIS key expansion units, up to 48 keys each;
  • Simplex communication with subscribers via protocols SIP, «Armtel-IP»;
  • Duplex communication via SIP protocol;
  • Communication between terminal devices via Wi-Fi, Ethernet LAN or using ADSL (for versions with ADSL module);
  • Two Ethernet ports – main and a spare one, including power supply by PoE;
  • Recording and playback of sound messages on DIS-IP2 with the help of programmed key with local function of fragment recording;
  • Adjusting the volume of the built-in speakers and ringing tone with the programmed buttons;
Document
Version
Language
Date
Action