Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Home | Products | PA/GA systems | DCN-15A Analogue subsystems module

DCN-15A Analogue subsystems module

The DCN-15A Analogue Interface Module is a compact 15-channel converter of the digital interface E1 into analog low-frequency communication lines and discrete I/O lines to provide communication with analoge quipment and receive signals from other systems.

Parameter
Value
Rated power supply voltage
48 V
Power supply voltage range
from 36 to 60 V
Consumption power, max
20 W
Electrical protection class by GOST IEC 61140-2012
III
Protection level provided by shells by GOST 14254-2015
IP20
Climatic version, atmosphere type by GOST 15150-69
NF4.1
Seismic resistance category (under NP-031-01)
I
Safety Class (under NP-001-15)*
3H (Normal)
Ambient air permissible temperature range
from - 5 to + 55 ºC
Atmospheric pressure
from 84 to 106,7 kPa
Relative humidity at 25 ºC
up to 80 %
Dimensions, max
482×268×43 mm
Weight, max (without connection cables to DCN-15A)
(2,2 ± 0,05) kg
Dimensions of DCN-15A connection cable board, max
125×70×61 mm
Total length of the connection cable, including the connector, max
1810 mm
Connection cable weight
(0,45 ± 0,04) kg
Analog path parameters:
Number of analogue interface lines
15
Nominal output signal level
775 mV ± 5 %
Nominal input signal level
775 mV ± 5 %
Control lines for analog subscriber:
Number of lines (configured as «input» and «output» for 48 V power supply)
60
Input current (line – «input»), max
5 mA
Output current (line – «output»), min
50 mA
*The conformity of the product to safety class 4H for NP-001-15 is allowed

DCN-15A is a compact analog connection module unit of the Armtel digital Intercom and PA/GA communication systems DCN.
DCN-15A has 15 two-way interfaces of LF-analogue lines and 60 discrete two-way control lines for connecting end devices, and also digital interface E1 for connection to a DCN-type system.
Central exchange unit of DCN system controls operation of DCN-15A and subscriber units or discrete lines connected to it by E1 line.

  • Connection to the system via Е1 interface for simplex communication with fifteen subscribers with analogue interface (connected subscriber may have up to eight call keys);
  • Construction of multi-channel system of zonal PA/GA (up to 15 channels, maximum eight zones per channel) using power amplifiers and a relays for switching loudspeakers’ lines;
  • Connection up to 60 discrete control lines for each analogue interface for controlling alarm systems and automation, as well as for indicating various statuses and connection modes (busy, incoming and out-going calls, etc.) on the subscriber unit keys;
  • Indication of CPU, E1 stream lines, subscriber unit connection ports, failures, RS-232 interface sockets for computer connection;
  • DCN-15A is equipped with polarity protection of power supply connection, overcurrent and overvoltage protection for discrete lines and surge voltage protection for analogue lines.
Document
Version
Language
Date
Action