ACM-IP Analogue subsystems module

Analogue subsystems module АСМ-IP is designated to be used within decentralized Intercom and Public Address / General Alarm system Armtel IPN at industrial and transportation sites.

ACM-IP allows to connect amplifiers, analogue low-frequency lines and discrete control lines, signaling devices, to provide interaction with automation and alarm devices.

Parameter

Value

Rated power supply voltage

-48 V

Operating voltage

from -36 V to -60 V

Class of the device to be powered by standard PoE
IEEE 802.3af-2003

Class 0

Maximum power consumption by Ethernet line, max

12,95 W

Maximum current consumption by Ethernet line,
max

0,35 А

Current consumption, max

45 mA

Speech bandwidth

from 300 to 6800 Hz

Nominal output level of analogue signal, min

775 (0) mV (db)

Signal / noise ratio, min

60 db

Control line input current, max

1 mA

Maximum output current of the control line, min

50 mA

Communication interface

100BaseT Ethernet

Communication protocol

«SIP», «Armtel-IP»

Operating temperature

from -5˚C to +55˚C

Air humidity

Up to 80 % at +25˚С

Atmospheric pressure

from 84 to106,7 kPa

Electrical safety class

III

Dimensions, max

125×90×60 mm

Weight, max

0,4 kg

Analogue subsystems module АСМ-IP is designated to be used within decentralized Intercom and Public Address / General Alarm system Armtel IPN at industrial and transportation enterprises.

ACM-IP allows to connect to the system various analogue equipment, amplifiers, analogue low-frequency lines and discrete control lines of simplex communication, signaling and alert devices, to provide interaction with automation and alarm devices.

Connection of amplifiers in ARMTEL IPN PA/GA system. Switching of loudspeaker lines (up to 8 zones);
Connection to radio base station gateway and selective radio links MSR4;
Connection of simplex analogue intercoms to Armtel IPN system;
Connection of alarm and automation systems through «dry contact»;
Automatic playback of pre-recorded messages;
Initiation of broadcasting and control of relay outputs by call stations of the system;
Broadcasting of the incoming connection through the LF interface line;
Outgoing call and two-way communication with SIP-subscribers in the «half duplex» mode using external analog equipment;
PoE power supply, as well as auxiliary 48VDC power supply;
Remote administration using web interface or PN system administration software;
64 levels of priority.