Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.
Home | Products | DIS-IP Desktop call station

DIS-IP Desktop call station

DIS-IP Desktop call station is designated to be used at decentralized Intercom and Public Address / General Alarm system IPN at industrial and transportation sites.

DIS-IP contains built-in software and configuration data, which allows it to provide connection to other subscribers directly, connection priorities, communication and display modes. IP-network based on the standard network equipment is used for direct communication between the IPN devices, without using of any central exchange or servers.

Rated power supply voltage
-48 V
Operating voltage
from -36 V to -60 V
Maximum operating current (for 32 keys version)
98 mA
Nominal power supply voltage via PoE function
Class of device to be powered by standard PoE IEEE 802.3af-2003
Class 0
Maximum power consumption by Ethernet line
12,95 W
Maximum current consumption by Ethernet line
0,35 А
Static current, max
25 мА
Frequency band of the sound signal transmission spectrum
from 300 to 6800 Hz
Communication interface
100BaseT Ethernet
Communication protocol
«SIP», «Armtel-IP»
Maximum electric power of the main amplifier
2 W
Operating temperature for versions without AC/DC and DC/DC transducers
from -5˚C to +55˚C
Air humidity
Up to 80 % at +25˚С
Protection level
Atmospheric pressure
from 84 to106,7 kPa
Electrical safety class
Dimensions (with maximum vertically raised microphone), max
261×200×410 mm
Weight, max
1,10 kg

DIS-IP master call station is used in serverless Armtel digital Intercom and PA/GA communication systems.
DIS-IP is a desktop call station and has versions for eight, sixteen, twenty four and thirty two keys. The DIS-IP keys are equipped with LED indication, have increased mechanical strength and are resistant to wear, have a transparent cap for placing the inscriptions. Any key can be assigned for a communication function.
DIS-IP uses a highly sensitive microphone on a flexible “goose-neck” stand. The microphone has a red LED that indicates the type of incoming or outgoing communication with a constant glow or blinking. Microphone sensitivity and volume of integrated loudspeaker are controlled by software settings.
DIS-IP master call station is designed for installation in operator control rooms, offices and premises.

  • 8, 16, 24, 32 keys;
  • Direct simplex communication with IPN devices;
  • Group call initiated from programmable keys and Public Address for multiple zones;
  • Broadcasting of alerts, alarms from internal flash-memory for single subscribers and subscriber groups; • Extended voice signal bandwidth up to 6,8 kHz;
  • 64 levels of prioritization;
  • LED of keys indicate failure, busy, missed call and other subscribers statuses
  • Activating of control lines in ACM-IP and ACM analogue subsystem modules;
  • Built-in software and configuration data for processing connections, levels of priority, control of communication and indication modes;
  • Remote configuration using IPN system administration software;
  • Account for connection to SIP-server as subscriber;
  • Voice communication in “half-duplex” mode between DIS-IP and SIP-devices;
  • Adjusting of volume level of built-in loudspeakers using programmed keys.
Link copied

DIS-IP Desktop call station

Fill out the form and we will contact you

By clicking the “Send” button You consent to the processing of your personal data. We guarantee the use of your data only for the processing of your application. The full version of the “Agreement on the processing of personal data” can be found here.

Thank you! Your submission has been received!
Oops! Something went wrong while submitting the form.